Pararell and Right Angle Shaft Gearmotors

18 Sizes (40 ... 360)
Power P1 0,09 ... 160 kW
Nominal torque MN2 ≤ 7 100 daN m
Transmission ratio iN 6,3 ... 12 500

Universal mounting design
IEC standard motor
Rigid and precise cast iron monolithic casing
Wide range of accessories and non-standard designs
Easy and functional shaft-mounting design
Compliance with ATEX 94/9/EC directive (UT.D 123)

ATEX Directive 94/9/EC
What is ATEX 94/9/CE?
Atex 94/9/CE Is a European Community law

• It has been mandatory since 1st of July 2003
• This law concerns risks of injections in explosive atmospheres of equipments that we use in these atmospheres.
• It is used by countries of EU only!
  This law Classifies the equipments in 2 Groups (and these are divided in categories):
  GROUP I: CATEGORIES M1, M2
  GROUP II: CATEGORIES 1, 2, 3

The directive Atex 94/9/CE specifies minimum requirements for the equipment and protective systems for usage to the intended purpose in potentially explosive areas.

For the first time, the EC directive 94/9/CE covers electrical as well as non-electrical equipment.

Motion Control & Gearmotors

Integrated low backlash planetary servogearmotors synchronous and asynchronous servomotors

4 Sizes (56 ... 142)
Nominal torque at speed 0
M010,5 ... 25,5 N m
Nominal torque at speed nN1
MN1 0,9 ... 18 N m
Nominal (maximum) motor speed
nN1 1 200 ... 4 600 min -1
Accelerating torque MA2 ≤ 825 N m
Transmission ratio i 3,4 ... 50

1 or 2 planetary reduction stages
1 or 2 planetary reduction stages and 1 final bevel gear for right angle shafts
3 classes of low speed shaft angular backlash
Monolithic casing made of steel
Wide range of accessories and non-standard designs

Worm Gear Motors

14 Sizes (32 ... 250) Power P1 0,09 ... 55 kW Nominal torque MN2 ≤ 1 900 daN m Transmission ratio iN 7,1 ... 16 000 Universal mounting design Rigid and precise monolithic casing in cast iron Cylindrical worm shaft with ground and superfinished involute profile (ZI) Load capacity and efficiency to BS 721-83 integrated with ISO/CD 14521 Forced ventilation IEC standard motor Wide range of accessories and non-standard designs Easy and functional shaft-mounting design Worm wheels of A04 gear reducers and gearmotors made of nickel bronze with controlled phosphor content, in order to achieve improved performance from 6 to 18%, a higher load capacity, greater reliability and more wear resistance Compliance with ATEX 94/9/EC directive (UT.D 123)

Synchronous and asynchronous servogearmotors

(with worm gear, coaxial, parallel and right angle shaft)

4 Sizes (56 ... 142)
Nominal torque at speed 0
M010,5 ... 25,5 N m
Nominal torque at speed nN1
MN1 0,9 ... 18 N m
Nominal (maximum) motor speed
nN1 1 200 ... 4 600 min -1
Accelerating torque MA2 ≤ 825 N m
Transmission ratio i 3,4 ... 50

1 or 2 planetary reduction stages
1 or 2 planetary reduction stages and 1 final bevel gear for right angle shafts
3 classes of low speed shaft angular backlash
Monolithic casing made of steel
Wide range of accessories and non-standard designs

Standart WORM GEARMOTORS

6 sizes (118...742)
Power P1 0,09...5,5 kW
Nominal torque
MN2 ≤ 670 N m

Transmission ratio iN 6...75

Interchangeability (hollow low speed shaft diameter)
Motors to IEC standards
Universal mounting with lower feet, integral with casing and B14 flange on 2 faces
Rigid and precise cast iron monolithic casing with motor mounting integral flange
Improved and up-graded modular construction both for components and assembled products
High, reliable and tested performances (Ni bronze)
Reduced maintenance
Generous internal space between train of gears and casing

COAXIAL GEARMOTORS

7 sizes (0...7)
Power P1 0,09...11 kW
Nominal torque
MN2 ≤ 900 N m

Transmission ratio iN 4...200

Maximum interchangeability
Motors to IEC standards
Foot mounting integral with casing
Rigid and precise cast iron monolithic casing
Proportioned bearings to withstand high loads
High and reliable performances
Maximum compactness

PLANATERY GAERMOTORS

16 Sizes (200 ... 696)
Power P1 0,25 ... 55 kW
Nominal torque MN2 ≤ 20 000 daN m
Transmission ratio iN 10 ... 3 000

2, 3 or 4 reduction stages for both coaxial and right angle shaft
Motor standardized to IEC
Nodular cast iron casing with thick walls and stiffening ribs;
Wide range of accessories and non-standard designs
Easy and functional shaft-mounting design